PCB manufacturing process involves circuit board manufacturing, component procurement and inspection, patch processing, plug-in processing, program firing, testing, aging and a series of processes.
After the manufacturing of PCB circuit boards, there is a shelf life, beyond which the PCB needs to be baked, otherwise it is easy to cause the problem of PCB board bursting when the SMT is put on line for production.
Many companies use tracking barcodes to allow the plant's field information management system to track the quality of PCBS produced. From the original label paper printed bar codes to today's laser printed bar codes can achieve this purpose.
Why do you want to talk about the schematic principle in detail, because the schematic diagram contains a lot of information to draw PCB, such as the access point of the element pin, the current size of the node network, etc., see clearly the schematic di
Any non-standard operation in any link will seriously affect the quality of PCBA patch. The quality of PCBA patch can be controlled through the key links of steel mesh making, solder paste control, furnace temperature curve setting and AOI detection.
In the process of PCB processing, in addition to batch welding by reflow welding and wave soldering, manual welding is also needed to produce complete products.
The FPC board is soft and not vacuum packed when leaving the factory. It is easy to absorb moisture in the air during transportation and storage. It needs to be pre-baked before SMT line casting to slowly force out the moisture.
During the industry boom, many PCB processing manufacturers will carry out PCBA outsourcing processing under the condition that they cannot normally schedule production. Send PCBA orders to other competent PCBA manufacturers.
There are many kinds of PCB substrates, but they are generally divided into two categories, namely inorganic substrate materials and organic substrate materials.
The design defects of PCBA are difficult or even impossible to solve in the production process. The negligence of PCB design quality control will lead to the waste of components, materials and working hours, and even cause heavy losses.
Software vendors and third-party engineers have also tried and failed to achieve acceptable performance improvements.
The load on the server is lighter than that on the client and therefore does not affect system performance. Tests on this environment show that the server is very responsive and does not slow down the client.